Licensed abatement for Edmonton homes and businesses

Asbestos Removal and Abatement in Edmonton

When testing confirms asbestos in materials you need to disturb, our in-house abatement crew removes it under containment and negative air, disposes of it as regulated waste, and provides clearance documentation before your renovation or restoration goes ahead.

  • In-house abatement crew
  • Type 1, 2 and 3 work
  • Air monitoring
  • Clearance documentation
  • IICRC
  • Unified Restore Inc. BBB Business Review
  • Restoration Industry Association member

Found suspected asbestos? Stop work and leave it undisturbed. Call us.

780-802-3940

When removal is needed

Test first. Then remove.

Asbestos that is in good condition and will not be disturbed is often safest left alone. Removal becomes necessary when you plan to renovate, demolish or repair materials that contain it, or when water or fire damage has made those materials crumble. In Alberta, materials in older buildings must be identified before demolition or renovation work begins, which is why every abatement job starts with asbestos testing.

Asbestos was used widely in Canadian homes through the post-war decades, and products containing it were sold until Canada's ban took effect on December 30, 2018. Homes built before 1990 are the most likely to contain it in drywall joint compound, textured ceilings, vinyl flooring and insulation. Our guide to asbestos in older Edmonton homes covers where it usually hides.

Free assessment

Get help today

Tell us what happened and we will get back to you fast. Emergency right now? Call 780-802-3940, we answer 24/7.

    Is this an emergency?

    Are you making an insurance claim?

    Emergency right now? Call 780-802-3940. We answer 24/7.

    What we remove

    Common materials we abate

    Textured and popcorn ceilings

    Spray-applied ceiling texture is one of the most common asbestos materials in Edmonton homes. Scraping it without containment spreads fibres through the house. Read popcorn ceilings and asbestos.

    Drywall joint compound

    Mud on drywall seams in homes built before 1990 often tests positive. A basement renovation or a water damage tear-out can disturb a lot of it at once.

    Vinyl floor tile and mastic

    Older 9 by 9 inch tiles and the black adhesive under them are common finds when flooring is lifted after a flood.

    Vermiculite insulation

    Loose, pebble-like attic insulation may contain asbestos. It is removed with industrial vacuums under full containment. See vermiculite in Edmonton attics.

    Pipe and duct insulation

    Wrapped heating pipes, duct tape and boiler insulation in older homes and commercial buildings.

    Stucco, siding and plaster

    Some exterior stucco, cement board siding and interior plaster used asbestos as a binder.

    Work types

    Type 1, 2 and 3 abatement

    Alberta's guidance groups asbestos work by risk, and the controls step up with each level. We are equipped for all three, and we tell you up front which type your project falls under and why.

    • Type 1 (low risk): small amounts of non-friable material, such as removing a few floor tiles or drilling a limited number of holes, done with wet methods and careful cleanup.
    • Type 2 (moderate risk): larger or more disturbing work, such as removing a section of drywall with asbestos joint compound. It requires an enclosure, HEPA vacuums, respirators and disposable coveralls.
    • Type 3 (high risk): large amounts of friable material, such as full ceiling texture removal or vermiculite. It requires full containment under negative air pressure, a decontamination unit, air monitoring and clearance testing before the containment comes down.

    Our process

    How an abatement job runs

    Confirm the scope

    We review lab results or collect samples, then walk the space to confirm exactly which materials come out and how much.

    Plan and notify

    You get a written scope, the work type, the schedule and a fixed quote. We handle any required notifications for the job.

    Contain

    Poly enclosures, sealed HVAC openings, negative air machines with HEPA filtration and a decontamination area keep fibres inside the work zone.

    Remove

    Materials are wetted, removed and double-bagged by trained workers in respirators and disposable suits.

    Clean and test

    HEPA vacuuming and wet wiping, then visual inspection and air clearance testing where the work type requires it.

    Dispose and document

    Waste goes to an approved disposal site as regulated waste. You receive documentation for your records, insurer or buyer.

    Why it matters

    Do not DIY this

    Why homeowners should not remove asbestos themselves

    • Fibres travel. Without containment and negative air, fibres move through ductwork into the rest of the house.
    • Symptoms come decades later. Asbestos-related diseases can appear 20 to 40 years after exposure, so there is no warning sign while you work.
    • Disposal is regulated. Asbestos waste cannot go to a regular landfill bin.
    • Sales and claims need paperwork. Buyers, lenders and insurers increasingly ask for abatement and clearance records.

    Found something suspect? Stop work, keep people out of the area, and call 780-802-3940.

    Cost

    What abatement costs

    Price depends on the material, the quantity, the work type and access. As a rough guide, small projects such as a single room or a small ceiling usually run $1,500 to $5,000, and large projects such as a whole-house ceiling, a full basement or vermiculite attic removal run from $5,000 to $30,000 or more. Testing beforehand typically costs $300 to $800 for a standard home. Our asbestos removal cost guide breaks this down further. We quote every job in writing after seeing it.

    *Pricing note: These are general industry ranges shared for information only. They are not a quote or a price list. Every project is different, and the final cost depends on the size of the affected area, the materials involved, testing results, access, and the containment, disposal and safety steps Alberta regulations require. Unified Restore scopes every job on site and provides a written estimate before any work begins.

    FAQ

    Asbestos removal questions

    Do you do asbestos removal in-house?
    Yes. Our own trained crew performs Type 1, 2 and 3 abatement, so testing, removal and any restoration or rebuild are handled by one company.
    Do I need testing before removal?
    Yes. Removal is planned from lab results, so we know exactly which materials contain asbestos and how much. If you have not tested yet, start with asbestos testing.
    How long does asbestos removal take?
    A small Type 1 or Type 2 job often takes a day. Type 3 projects such as full ceiling texture or vermiculite removal usually take two to five days including setup, removal, cleaning and clearance.
    Can I stay in my home during abatement?
    For small contained jobs, usually yes. For Type 3 work, we normally ask that the work area and connected rooms stay unoccupied until clearance.
    How much does asbestos removal cost in Edmonton?
    Small projects usually run $1,500 to $5,000 and large projects $5,000 to $30,000 or more. We give a written quote after reviewing results and seeing the space.

    *Every project is different, so this is a general range, not a quote. Final pricing is confirmed with a written estimate after an on-site assessment.

    Is asbestos removal covered by insurance?
    Removal needed because of a covered loss, such as a flood or fire that damaged asbestos materials, is often included in the claim. Removal for a planned renovation usually is not.

    More answers on our FAQ page.

    Written by the Unified Restore team

    Unified Restore Inc. is an Indigenously owned IICRC Certified Firm based in Sherwood Park, led by owner Donovan Meeker, who brings more than ten years in restoration, from lead technician to project manager. WCB covered, fully insured and a licensed, registered Edmonton business. Last reviewed October 2026.

    Need asbestos removed?

    Send us your lab results or call to book testing. We quote removal after we have seen the material and the scope of your project.